Diode-led CHROMAPATH Bedienungsanleitung PDF herunterladen

1.877.817.6028

www.DiodeLED.com

[email protected] www.DiodeLED.com

INSTALLATION GUIDE

1 OF 1

CHROMAPATH™ ALUMINUM CHANNELS

STRIP LIGHT & CHANNEL INSTALLATION

STEP 3: Assembly (End Caps are not for use with CLICKTIGHT™ DC Plug Connector)

STEP 4

Consult the diagrams below for the correct mounting orientation

of your channel. For the SLIM Channel, use 3M Adhesive Tape

(DI-0775) to mount the low prole channel into place.

REMOVAL

CHROMAPATH™ Aluminum Channel can be removed with a at-

head screwdriver. Follow the diagram below to twist the channels

free from their mounting clips.

Removal Tip: Put masking tape on screwdriver tip to prevent

scratching the channels.

Fig. B

Mounting clips are not for

use with SLIM channel.

Lens Application

1. Feed lead wires* through

open end-cap.

2. Afx end-caps to channel.

3. Snap lens into place.

4. Align mounting clips and

screw into place. Firmly

press the channel onto

mounting clips.

SQUARE

Channel

45º

Channel

SLIM

Channel

DUO

Channel

*This wire-lead opening is only large enough for no larger than 18/2 AWG

lead-wires. For thicker wires, drill a larger opening in the end-cap.

*Mounting Clips add 2.1mm

to the channel height.

Trimming Bars to a custom size:

Channels may be cut to size with an appropriately rated blade for metal

cutting. Wet sand the cut channel edge with wet 400 grit sandpaper. For a

smoother nish, follow-up with 600 grit, then 800 grit, 1200 grit, and nally

2000 grit for a awless nish.

Trimming Lenses to a custom size:

Lenses can be trimmed to size with heavy duty scissors.

Outdoor Installation Restrictions:

See Safety/Warnings/Disclosure section of CHROMAPATH Specication

Sheet for full outdoor installation restrictions and guidelines.

End-To-End Connection

The end-to-end connector plug is useful

for seamless connections between two

linear channels.

Not for SLIM channel

Fig. A

SQUARE

Channel

45º

Channel

SLIM

Channel

DUO

Channel

STEP 1: Preparing Strip Light

Trim strip light to desired length and attach connectors. Remove

protective back from strip light (Fig. A).

STEP 2: Mounting Strip Light

With adhesive surface exposed,

apply strip to the trench of the

aluminum channel (Fig. B) and

move on to assembly.

IG061214-1.1

Inhaltsverzeichnis

Seite 1 - CHROMAPATH™ ALUMINUM CHANNELS

[email protected] www.DiodeLED.comINSTALLATION GUIDE1 OF 1CHROMAPATH™ ALUMINUM CHANNELS®STRIP LIGHT & CHANNEL INSTA

Kommentare zu diesen Handbüchern

Keine Kommentare

Diode-led CHROMAPATH Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Diode-led CHROMAPATH herunter. Diode LED CHROMAPATH User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Diode-led CHROMAPATH