IG051514-1.0
1.877.817.6028
www.DiodeLED.com
INSTALLATION GUIDE
®
3 OF 3
RGB WALL MOUNT COLOR CONTROLLER
Troubleshooting
Additional Resources
Prior to troubleshoong, ensure a compable system is installed. Verify compable xtures, drivers, controls and addional components were
specied correctly.
Visit the online product page at www.DiodeLED.com for addional product specicaons & warranty informaon.
• RGB Wall Mount Color Controller Specicaon Sheet
For full specicaons.
• Voltage Drop Charts
Use to specify appropriate wire gauge for installaon. Available at the ‘Tools & Resources’ page at www.DiodeLED.com.
QUESTIONS?
Visit www.DiodeLED.com or contact Customer Support at info@DiodeLED.com
or 1.877.817.6028 Monday through Friday, 7:00am - 5:00pm PST.
Fixture does not illuminate
• Verify the system is wired correctly & ensure polaries are correct.
• Ensure the driver and xture have the same voltage specicaons (12V & 12V, or 24V & 24V).
Fixture is consistently ashing or ickering
• Ensure no more than a single RGB receiver is aached to each driver output.
• Verify a compable constant voltage driver is installed.
• Ensure a compable constant voltage dimmable xture is installed.
Fixture is inconsistently ashing or ickering • Verify all connecons are properly secured. Ensure all accessories are properly connected.
Fixture is slowly ashing
• Ensure driver is not overloaded. An overloaded driver will cause the internal auto-reset of the
driver to trip repeatedly.
Correct colors are not illuminang
• Verify the correct leads are connected to the correct terminals on the receiver.
• Ensure leads at opposing end of xture are not crossed (if leads exist).
Remote(s) unresponsive
• Ensure the 4-digit unique ID on the remotes match the receiver.
• Replace the baery if necessary.
Shi in brightness/color of xture array
• Verify the appropriate size wire gauge (AWG) has been installed. See the ‘Tools & Resources’
page at www.DiodeLED.com for Voltage Drop Charts.
• Ensure xture length is not exceeding maximum run limit.
Driver is buzzing
• Verify the constant voltage driver is compable with compable with PWM controls. See
the driver specicaon sheet and check the ‘Dimmability’ specicaon.
(4 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern