1
Wi-Fi LED Controller
READ ALL INSTRUCTIONS PRIOR TO INSTALLATION
WARNING!! DO NOT CONNECT THIS PRODUCT DIRECTLY TO 120V AC POWER!
Wi-Fi LED Controller Technical Specications
Input Voltage DC12V ~ DC24V Constant Voltage Driver
Output Voltage DC12V~DC24V
Output Current Max 3A*3 (3A per channel)
Output Control
Can operate the following DC12V~DC24V LED installations: 1) Dimmable (DIM) Single-Color Installation; 2) Color-Changing RGB
Installation; 3) Color Temperature (CT) Adjustable Installation
Control Distance Max 328 ft (100 m)
RGB Color Change Mode 32 xed modes & 8 custom DIY modes
Scene mode 9 custom scenes
Ambient Operating Temperature -4° ~ 122°F (-20° ~ 54°C)
Dimensions L5” x W2.8” x H1.75
Weight (G.W.) 10.23oz (290g)
Software Technical Specications for Mobile Remote
Platform Android 2.1 & later, iOS 4.3 & later, with Wi-Fi function
Mobility Compatibility Android (2.2MB), iOS (3.4MB)
Language English
Other Free software
POWER INPUT/LED OUTPUT INDICATOR MANUFACTURER
INTERFACE
SSID CODE
SWITCH
ON/OFF SCENE
Controller Reference Guide
Installing the Wi-Fi Antenna to
the Wi-Fi LED Controller
1. To install, turn clockwise until secure.
2. To uninstall, turn counterclockwise.
• This product should be installed and serviced by a
qualied electrician.
• This product is rated for indoor installation and is not
protected against moisture. Do not expose this color
controller to direct or indirect moisture.
• Proper heat dissipation will prolong the working lifespan
of this product. Please install in a well-ventilated area.
• Only install recommended LED drivers and xtures.
Please contact technical support or visit the product page
for compatible products.
• Please ensure the proper size gauge wire is installed.
When choosing wire, factor in voltage drop and
amperage rating. Improper wire gauge installation could
lead to overheating wires, leading to electric shock or re.
• Do not connect this product directly to 120V AC power.
• Turn off 120V AC power at the main breaker prior to
installation.
• Check all wire connections and polarities before applying
power to avoid any damages to your LED xtures.
• If an error or fault occurs, see troubleshooting or contact
technical support for assistance.
• The Wi-Fi LED Controller can operate DC12~DC24V
power supplies and LED xtures. However, 12V LED
xtures must be matched with a compatible 12V power
supply, and 24V LED xtures must be matched with a
24V power supply. Never install power supplies and
xtures of different voltages together.
Warnings
Kommentare zu diesen Handbüchern