Diode-led SPOTMOD Recessed Gimbal Fixture Bedienungsanleitung PDF herunterladen

SPOTMOD™ Recessed Gimble 12V LED Fixture

READ ALL INSTRUCTIONS PRIOR TO INSTALLATION

TECHNICAL SPECIFICATIONS

• Recessed Diameter: 1.75 in.

• Input Voltage: 12VDC

• Power Consumpon: 2.13W

• Angle Adjustable: +/- 20 °

• Environment: Suitable for damp locaon.

Not for in-ground installaon.

WARNING! DO NOT CONNECT THIS

PRODUCT DIRECTLY TO 120VAC POWER!

• Turn power OFF at main breaker before servicing or install-

ing this product.

• This product is intended to be installed and serviced by a

qualied, licensed electrician.

• Install in accordance with the Naonal Electric Code, and

local regulaons.

• Install in a well-venlated, combuson-free environment.

• Do not disassemble or modify this product beyond the

direcons in this guide. Do not cut o the aached wet

locaon plug. Doing so will void the NRTL cercaon and

product warranty.

• Ensure applicable wire is installed between driver, xture,

and any controls in between. When choosing wire, factor

in voltage drop, amperage rang, and type (in-wall rated,

wet locaon rated, etc.).

SAFETY & WARNINGS

MOUNTING

Prior to mounng, perform a dry assembly and conrm all

lighng and accessories are compable, properly connect-

ed, and funconal. Never mount or install when connected

to power.

To mount, drill a hole with a 1.75 in. hole saw (not

included). Squeeze mounng ns and recess the module

into the hole.

TROUBLESHOOTING

Fixture does not light up: Turn OFF main power. Ensure all

polaries are correct and all connecons are secure. Turn

main power ON.

Fixture is ickering: Ensure a compable system is in-

stalled. If installing a dimmable system see the Magnec

Dimmable Driver or REIGN Dimmer installaon guides etc.

for more thorough wiring instrucons. Ensure all connec-

ons are secure.

Fixture is overheang: Ensure xture is installed in a well-

venlated area. Ensure driver is not overloaded and wiring/

accessories are not exceeding their maximum amperage

rang.

Fixture turns ON and OFF connuously: Ensure driver is

not overloaded. Overloaded drivers will connuously turn

ON and OFF as a form of automac reset protecon.

For addional quesons/concerns regarding installaon or

operaon of this product, please contact technical support.

Please have all product part numbers on hand for fast and

ecient technical assistance.

• Aached wires are not rated for installaon behind walls

and ceilings. DC extension cables, connectors and other

accessories/components are not rated for in-wall instal-

laon unless otherwise noted.

• This product is not rated as submersible.

• This product is not suitable for in-ground installaon.

• Do not install near chlorinated or treated water.

SAFETY & WARNINGS CONTINUED...

Rev 1.1, 2/5/14

1 2

Inhaltsverzeichnis

Seite 1 - TROUBLESHOOTING

SPOTMOD™ Recessed Gimble 12V LED FixtureREAD ALL INSTRUCTIONS PRIOR TO INSTALLATIONTECHNICAL SPECIFICATIONS• Recessed Diameter: 1.75 in. • Input Vo

Seite 2 - AC Power

Plug-In Adapter Installaon: Ensure main power is turned OFF. Aach a ‘Male Wet Locaon to DC Adapter Connector’ to the spot module and then connec

Kommentare zu diesen Handbüchern

Keine Kommentare

Diode-led SPOTMOD Recessed Gimbal Fixture Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Diode-led SPOTMOD Recessed Gimbal Fixture herunter. Diode LED SPOTMOD Recessed Gimbal Fixture User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Diode-led SPOTMOD Recessed Gimbal Fixture